Unlike Last Season, Early Schedule Will Challenge Cubs In 2017

The celebration has ended, the 108 year drought is over, and baseball on Chicago’s North Side should return to normal. In other words, fans of the Cubs can go back to worrying.

Several big concerns face them as they look toward the 2017 season, in addition to the nearly impossible task of topping the World Series Championship they earned in October. No team has won the Fall Classic back to back in this century, although a much shorter span than the Cubs endured between titles.

That trip to the World Series was made easier by the early schedule, an arrangement the Cubs will not enjoy next April. Chicago did not play a winning team until April 18 against the Cardinals, which was their fifth series of the season. The Cubs did not play another winning team until May 2, when they played the Pirates. Spending the first month against the likes of Cincinnati, Arizona, Atlanta, and Milwaukee would provide nearly any team with the confidence needed to carry them through the most important stretch of the season. To emphasize just how important a hot start is, examine the National League from last season.

All four of the teams who reached the Division Series posted winning percentages over.700 during the first week of 2016, led by the Cubs and Nationals winning eight of their first nine games. The Giants were victorious in six of their first eight, and the Dodgers won seven of their first ten.

The advantage of opening against non-contenders will not be available to the Cubs in 2017, when the early part of their schedule features matchups against the only two teams that had winning records against Chicago last year. They open in St. Louis on April 2nd, a Sunday night game between the two rivals that will be broadcast on national television.

What could make that initial series even more troubling for the Cubs is the strong possibility that one of their most exciting players from last year will be playing for the opposing team. Center fielder Dexter Fowler, Chicago’s spark plug at the top of the batting order, is a free agent. Many baseball writers have projected St. Louis as the most likely team to sign Fowler. After the series in St. Louis, the Cubs must play the team that nearly eliminated them in the NLCS. The Dodgers, who won both of their regular season series against the Cubs in 2016, have the opportunity to avenge their playoff loss on the opening weekend in April.

The hot start Chicago used to build momentum for their World Series run last year is far less likely to befall them in 2017, simply because of the competition. Instead of opening against last place clubs like San Diego and Cincinnati, the Cubs will be tested right out of the chute by teams expecting to be contenders.

Posted in Uncategorized | Comments Off on Unlike Last Season, Early Schedule Will Challenge Cubs In 2017

The Eurozone Train Wreck Continues Into 2017

The European Union seems to be trying to hold itself together, but it is indeed wobbling itself apart like an aircraft engine with an unbalanced propeller and the vibrations are getting worse reverberating from one side of the continent to the other, where no nation is spared from the challenges which await – so what can we expect in 2017 you ask?

Well, “Brexit” has already had some effect on Germany and other nations are considering similar exits from the EU, which could quicken its demise. The recent Italian vote was problematic as is the condition of the Italian banks. Remember when Greece got caught short? Do you remember in 2014 what was going on in the EU? Let me remind you quickly:

MSNBC Money “China, France drag on global manufacturing revival,” published on February 3, 2014, written by Jonathan Cable and Koh Gui Qing which stated; “Manufacturers around the world enjoyed a solid start to the year as order books swelled, surveys showed on Monday, though a struggle for growth in China and a downturn in France took the shine off the overall picture. Euro zone factories had their best month since mid-2011 and, with unemployment near record highs, increased headcount for the first time in two years. They were led by a sharp pick-up in Germany and a revival among the states on the region’s periphery. But France, the bloc’s second biggest economy, remained a drag on the region.”

As an example Greece, when they entered the EU they had a bad credit rating and any loans would of cost them a lot in interest, when they joined the EU they effectively got the same rate on loans as Germany who as you probably know are very stable in the financial sector, so Greece took loans out at low interest rates for years.

Yah, Greece has always been a financial disaster like Argentina or Zimbabwe… now it’s all gone sour they are left with huge debts and so on, Italy and Spain are in the same boat and seeing as the UK loaned ALOT of money to Spain and others we are massively exposed to the crisis. Spain for example has more empty property (new builds) than the ENTIRE USA.

Real estate tanked in Spain, we all read about that in the WSJ, few in the US realized it was that bad. In 2008 China was challenged even after their 2008 stimulus as their municipals did elaborate growth projects, building for the sake of it?

Remember the original plan for the EU was to introduce one currency (which they did) and then introduce a EURO Government to manage it, the second part never happened and now the backlash is huge, and it doesn’t really matter that the 2008 crisis started in the US. The EU wasn’t doing that well before the crisis. And we shouldn’t blame the US for the crash, let’s not forget one of the enablers was AIGs London Office selling insurance often with guarantees in excess of 130% of face value on those mortgage bundles and credit default swaps.

Yes, we have some socialists in the US and when the capitalists and socialists get together or start using each other it is as if everyone loses their brains. So, the slow-motion train wreck and Eurozone melt-down continues, who is to say if it can continue for long without falling apart, and once that engine falls off the plane, its coming in for a very hard landing. Let’s hope that doesn’t happen in 2017.

Posted in Uncategorized | Comments Off on The Eurozone Train Wreck Continues Into 2017

How Does the Ford GT Stack Up?

How will it compare to the competition?

The GT is by no means a Shelby GT 350 R, not even close. Besides the over $350,000 jump in price and the additional 100 or more horsepower. The new GT is even more track-focused then the previous ones. And the mid-engine layout, combined with the GT’s carbon-fiber construction it much more than a muscle car and more of a Super car.

Even though Ford has not decided on a specific horse power, the new GT with 3.5-liter twin-turbo V6 will produce more than 600 horsepower. Standing up well to the Corvette Z 06 and its’ 650 horses. Now Ford says it is working on the power-to-weight ratios to be the best of any production car. Even if they can’t hit the ratio of the Koenigsegg One with its 2.2 lbs / hp and make it to the range of the McLauren P1 with its 3.5 lbs / hp. Even with its aerodynamics the approx. 3500-lb Corvette Z06 may be a little overweight to held ground with the new GT Priced like a Lamborghini Aventador

Knowing it’s expected price range points to the real competition of the new 2017 GT. Granted the Lamborghini Aventador is packing 691 horse power, but outweighing the Corvette Z06 in curb weight by another 500 pounds, it may have a hard time keeping up with the new GT on the track. When you consider the Aventador holds twice the cylinders as the GT’s twin-turbo V6, and the fact that the Aventador is a naturally aspirated V12 all wheel drive, you can expect it to be faster off the line.

It will be interesting to see how the GT compares to the McLaren 657LT the car that feels like a competition vehicle. Weighing in at less than 3000 lbs, the 657 is pretty light, but the GT will probably weigh less. The Mc Laren 675LT is also a limited-production car, with only 500 units slated to built and cost about $50,000 less than the Lamborghini.

Then there is the Ferrari F12tdf with a price point just under $500,000 with a substantial increase in power. Touting a 6.3-liter V12 with 770 horsepower hitting 0 to 60 in under 3 seconds. The Ferrari will be a head over the GT by more than 100 horsepower, but the based on Fords claims the GT should be much more light weight. With Ford skipping a hybrid-electric system, it will be something to pit the new and severely less expensive Acura NSX with its hybrid tech and all-wheel drive against the new GT and its focus on light weight. With the NSX and its 573 horsepower will it be enough to hold its own against the GT? Time will tell.

Posted in Uncategorized | Comments Off on How Does the Ford GT Stack Up?

Autodesk : Top 4 New Features

Autodesk introduced AutoCAD 2017 in March 2016 aiming to help its users stay at the forefront. This latest release lets you work quicker and smarter across connected desktop and mobile solutions, create personalized design experiences, easily team up with colleagues, and stay updated with the latest features and updates. AutoCAD 2017 also includes AutoCAD 360 Pro, a mobile app that allows users use AutoCAD on the go. The latest version addresses several user functionality requests and delivers features that enhance everything from workflows to graphics processing. According to Autodesk, several AutoCAD users globally will be benefitted by several enhancements that have been added in the latest version, such as enhanced 3D printing, new features such as ‘smart centrelines’, share design views on cloud and improvements to PDF handling features.

In the updated features of the 2017 version, PDFs have been added to the supported ‘import file’ formats. As a result, users can import geometry, True Type text and raster images from a PDF file or underlay into the current drawing as AutoCAD objects. Also, the centerlines and center marks get updated accordingly when users move associated objects. Learning content and product updates are seamlessly delivered to help users get the most out of new features with Autodesk Desktop app, an application that substitutes Autodesk Application Manager. Here, users also tend to get the latest security patches and updates for all 2015, 2016, and 2017 versions of Microsoft Windows based Autodesk products. Now, let’s discuss the top 4 new features that Autodesk has included in its AutoCAD 2017 release. Top 4 New Features in Autodesk AutoCAD 2017

Enhanced 3D printing

Utilising the new Autodesk print studio you can create a 3D print ready file and directly print it in nearly all types of 3D printers. This 3D printing tool is offered by spark technologies and is available for 64 bit machines only. To make full use of this tool, you need to go to AutoCAD 3D modelling workspace and select print studio tool from 3D print panel of output tab. If it’s the first time you are using this tool then a prompt will appear from where you can download this tool. After you’ve downloaded and installed, click on print studio again and click on watertight or closed mesh object from your drawing which you want to use for 3D printing.

Smart Centrelines and Centre marks

This new AutoCAD release lets you to easily add centre lines and centre marks to the geometry. Likewise, you need to type the command ‘Centremark’ and click on circular object to create the centre mark, you can use this command to make a centre mark on circle, arc and fillet. Share Design Views on Cloud

Now, you can directly share files with users who don’t even have AutoCAD using A360 cloud account and all they require is a web browser for accessing shared drawing. In order to share a drawing, ensure that you’re logged into your Autodesk 360 cloud and your drawing is saved.

Co-ordination Model

In AutoCAD 2017 coordination model functionality has been improved with support for object snaps. Attach a Navisworks or BIM 360 Glue model to your AutoCAD drawing so you can view it as an underlay. Then just use the standard AutoCAD endpoint and center object snaps to snap to exact locations as you create and edit your design based on the attached models.

Posted in Uncategorized | Comments Off on Autodesk : Top 4 New Features

How Can I Set Up An Online Business?

If you’ve been considering setting up an online business you’ve most likely been motivated by sheer volume of buying and selling that is now taking place on the internet.

More and more people are buying products and services online. And if you set up your own online business you can claim your cut of this expanding marketplace. Here are the 5 steps to follow to set up an online business.

1. Pick Your Market

If you’re going to set up an online business your first task is to determine what type of business it’s going to be. Are you going to sell products or services? You can sell your own products or you can sell products produced by other businesses who will pay you commissions on your sales. Or you may choose to set up a membership website or offer teaching and coaching services online.

Getting a website online isn’t as complicated as you may think. Initially you’ll need to purchase a name for your website (known as a domain name). Next you need to ‘rent’ some space on the internet (known as website hosting). Lastly you’ll need a software package that will make it possible for you to put written text, images, videos etc onto your website. There are many website building programs available that make this whole procedure very easy.

3. Get Visitors To Your Website

When you website is online you have to get potential customers to visit it. There are two main ways to do this. You can use free website traffic techniques or paid website traffic techniques. Both have their pros and cons and the most effective traffic tactic to use a mixture of both.

4. Develop A Customer List

It’s doubtful that your website visitors will want to buy anything from you on their first visit to your website. They may visit your website and never return. But obtain a visitor’s email address with a special email capture form, you can remain contact with them via email. Your emails can keep them informed about your business and encourage them to return to your website. If you offer something of value for free in return for someone’s email address they are more likely to give you their email address. This can be something as straightforward as a free report or eBook that is relevant to your industry.

5. Provide Value

The content material on your website and in your emails, articles or blog posts has to be more than continuously trying to sell. When you provide high quality, useful information to your target audience will come to know, like and trust you. Your prospective customers will then be more willing to buy from you and continue to be as loyal customers for many years.

Posted in Uncategorized | Comments Off on How Can I Set Up An Online Business?